Siemens
Automation Repair
We repair Siemens drives, PLCs and operator panels at component level, from Simoreg and Masterdrives through to Sinamics G120 and S120 units and the SIMATIC S5 and S7 families.
Every unit is assessed free of charge, repaired at component level in our Bolton workshop and returned fully tested with a 12-month warranty and test report.
- 24/7 emergency call-outs
- UK-wide service
- 12-month warranty
Siemens range we repair
Siemens is a global manufacturer of industrial automation, variable speed drives and motion control equipment used across manufacturing, processing, pumping, material handling and other industrial applications.
If your model is not listed, ask us. We repair current, obsolete and discontinued units.
Key features of our service
Common faults we repair
Sinamics and Masterdrives units report faults in the Fxxx or Fxxxxx format. Overcurrent, DC link and encoder faults make up most of the Siemens boards we repair.
- F30001 – power unit overcurrent (IGBT, motor cable, ground fault)
- F30002 – DC link overvoltage (deceleration, braking resistor)
- F30003 – DC link undervoltage (supply loss, precharge)
- F30015 – phase failure in the motor cable
- F30021 – ground fault detected in the power unit
- F0001 / F0002 / F0003 – overcurrent, overvoltage and undervoltage on G120
- F0011 – motor overload (I²t model)
- F0022 – power unit fault (gate driver, IGBT, heatsink sensor)
- F7011 – motor overtemperature (PTC / KTY sensor)
- F7902 – motor stall or loss of load detection
Why repair rather than replace?
Replacing a failed Siemens drive can be expensive, particularly when the original model is obsolete or difficult to source. Repairing the existing drive can be a faster, more cost-effective solution while avoiding unnecessary replacement, reprogramming and commissioning.
- Repair is also the only option for obsolete and discontinued units, where a like-for-like replacement no longer exists. Where a repair is not economic, we say so and can supply a tested refurbished unit instead.
- Component-level diagnostics and repair, never board swapping
- Every repair covered by a 12-month warranty
- Free fault assessment and a quote within 24 hours of arrival
- In-house soak and load testing before your unit goes back
- All major brands and models, including obsolete and discontinued units
- 24/7 emergency call-outs for production-critical breakdowns
- Nationwide collection and delivery
- Fixed-price quotes agreed before any work starts
How it works
Free fault assessment by our engineers.
Fixed-price quote within 24 hours of your unit arriving.
Component-level repair, full functional test and burn-in.
Test report and 12-month warranty included.
No fix, no fee on standard and high-priority repairs.
Siemens repair questions
24/7 emergency call-outs
Production line down?
Call 0161 399 0042 for 24/7 emergency call-outs, or book a repair for a free fault assessment and a fixed-price quote within 24 hours of your unit arriving. 12-month warranty.